Sawstop T-Glide Fence System Uživatelský manuál

SawStop®OWNER’S MANUALT-GlideTM Fence System-Professional Series II

Installing Your T-Glide Fence Systemmiter slots 1. Begin mounting the front rail (the longer of the two rails) to the front edge of your saw by cente

2. Take four more M8 x 25 countersunk socket head bolts and insert them through the four open holes in the front rail and table (see Fig. 2a). Place

Made inTaiwanSawStop,LLCwww.sawstop.comTCP10¨ Contractor SawSawStop®Model No. CNS 175Serial No. C074012345Electrical / Electricidad / Électricité115/2

Installing Your T-Glide Fence SystemContractor Saw5. Finish mounting the rear rail to your saw by inserting an M8 x 25 countersunk socket head bolt t

7. Once the rails are in place you can mount the extension table to the rails. The hardware needed to mount the extension table to the rails is in th

Installing Your T-Glide Fence System8. Locate the two leg support brackets. Remove the two M8 x 20 countersunk socket head bolts from the T-Gl

Installing Your T-Glide Fence System10. The extension table mounts to the rails with bolts that pass through holes in the rails and extension table (

13. Attach each support leg to the corresponding leg support bracket with an M10 x 40 hex head bolt, two M10 washers, and an M10 lock nut, as shown i

15. Place the straight-edge lengthwise across the middle of the table (see Fig. 15a) and level the middle of the extension table by turning the scre

Installing Your T-Glide Fence System18. Locate the fence and the red fence handle. Thread the handle into the cam lock on the front of the fence (see

1. You MUST install a rip fence before using your saw. Using the saw without a rip fence could result in serious personal injury.2. Never perform a

Installing Your T-Glide Fence Systemparallelism adjustment screwfront tube20. Press down on the fence handle to clamp the fence to the fr

Installing Your T-Glide Fence Systemgap22. Next, move the fence to the right end of the tube, repeat the above process to position the tube, and tigh

Adjusting Your T-Glide Fence SystemFig. 23right indicatorleft indicatorThe fence allows you to precisely set the width of your rip cuts (cuts that are

Adjusting Your T-Glide Fence SystemThe next step is to align the face plates to be parallel to the miter slots. Begin by sliding the fence a

Adjusting Your T-Glide Fence SystemIt is usually possible to adjust the position of the face plates by placing a small block of wood agai

Adjusting Your T-Glide Fence SystemInstall the fence on the front tube and position the face plate as desired, making sure to leave at least a small g

24 SawStop T-Glide Fence System - Professional Series II122 3 34567891010101011111012131415SawStop161718T-Glide Fence Exploded View

SawStop T-Glide Fence System - Professional Series II 25No. Description Part No. Qty.Professional Series II T-Glide Fence Assembly (items 1-18) TGP

26 SawStop T-Glide Fence System - Professional Series II79111283521226202216282321 46222721531025141329313032202424152162753536 410 4 4 4 4181818

SawStop T-Glide Fence System - Professional Series II 27SAWSTOP36” Fence System Rails and Extension Table Parts List for a Cabinet SawNo. Descripti

front railrear railfront tubesupport leg (2)extension tableleg supportbracket (2)fence handleT-Glide Rails Hardware PackOwner’s Manual T-Glide Table H

10191112220222610535314132931303215282321252424 4535 436 4162227276 47822022161 4 417171717171718181818181818191919191919191719SAWSTOP28 SawStop T-

SawStop T-Glide Fence System - Professional Series II 29SAWSTOP52” Fence System Rails and Extension Table Parts List for a Cabinet Saw No. Descrip

30 SawStop T-Glide Fence System - Professional Series II91112262102021022282321251413293130322424158352122022162753 4 43 453 453 453 43 45222167276

SawStop T-Glide Fence System - Professional Series II 31No. Description Part No. Qty.Professional Series II 36” T-Glide Fence Rails (items 1-12) TG

262535 4327822022161 4141329313032152823212524241091112220210536 41622276 47 42223 453 453 453 4201717171717171718181818181818191919191919191952” Fen

0153045SawStop10”ContractorSawSAWSTOPSawStop T-Glide Fence System - Professional Series II 33No. Description Part No. Qty.Professional Series II 52

SawStop, LLC9564 S.W. Tualatin RoadTualatin, Oregon 97062www.sawstop.comMain Phone - (503) 570-3200Service - (503) 582-9934Fax - (503) 570-3303Email:

Note: Your saw must be fully assembled before installing the fence system.Note: The drawings below show how to assemble both the 52” and 36” fence sys

Installing Your T-Glide Fence Systemmiter slotsfront railUse M8 x 16 bolts 1. Begin mounting the front rail (the longer of the two rails) to the f

2. Take two more M8 x 16 countersunk socket head bolts and thread one into the hole to the right of the notches and the other into the hole to the l

Installing Your T-Glide Fence SystemProfessional Cabinet Saw 3. Take two M8 x 25 countersunk socket head bolts and insert one bolt through the corres

Installing Your T-Glide Fence SystemProfessional Cabinet SawFig. 5a 5. Finish mounting the rear rail to your saw by inserting an M8 x 25 countersunk

6. Use a straight-edge to level the front edge of the left extension wing to the cast iron table top (see Fig. 6). You may have to pull up